flexfax: ECV FAX: Permission denied (unacceptable client TSI)

[Christophe Zwecker <doc@rrz.uni-hamburg.de>]

Hi,

I use 4.0pl1 on Linux 2.0.30 with an Elsa 28TQV

I guess I configured something wrong I get this mail after a faxcall:


An attempt to receive facsimile on ttyS1 failed because:

    

    ---- Transcript of session follows ----

Aug 15 10:47:22.05: [  360]: SESSION BEGIN 00000011 494022715433
Aug 15 10:47:22.05: [  360]: <-- [4:ATA\r]
Aug 15 10:47:35.05: [  360]: --> [4:+FCO]
Aug 15 10:47:35.06: [  360]: ANSWER: FAX CONNECTION
Aug 15 10:47:35.06: [  360]: RECV FAX: begin
Aug 15 10:47:40.25: [  360]: --> [27:+FTI:"ZWECKER & CO. GMBH  "]
Aug 15 10:47:40.25: [  360]: REMOTE TSI "ZWECKER & CO. GMBH"
Aug 15 10:47:40.25: [  360]: --> [20:+FCS:0,4,0,2,0,0,0,0]
Aug 15 10:47:40.25: [  360]: REMOTE wants 12000 bit/s
Aug 15 10:47:40.25: [  360]: REMOTE wants page width 1728 pixels in 215
mm
Aug 15 10:47:40.25: [  360]: REMOTE wants unlimited page length 
Aug 15 10:47:40.25: [  360]: REMOTE wants 3.85 line/mm
Aug 15 10:47:40.25: [  360]: REMOTE wants 1-D MR
Aug 15 10:47:40.25: [  360]: --> [2:OK]
Aug 15 10:47:40.26: [  360]: REJECT TSI "ZWECKER & CO. GMBH"
Aug 15 10:47:40.26: [  360]: RECV FAX (00000011): recvq/fax00005.tif
from ZWECKER & CO. GMBH, route to <unspecified>, 0 pages in 0:05
Aug 15 10:47:40.27: [  360]: RECV FAX: Permission denied (unacceptable
client TSI)
Aug 15 10:47:40.27: [  360]: <-- [7:AT+FKS\r]
Aug 15 10:47:41.89: [  360]: --> [7:+FHS:02]
Aug 15 10:47:41.89: [  360]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (code 2)
Aug 15 10:47:43.10: [  360]: --> [2:OK]
Aug 15 10:47:43.10: [  360]: RECV FAX: bin/faxrcvd "recvq/fax00005.tif"
"ttyS1" "00000011" ""

for which permissions I have to look ?

thx
-- 

   Christophe

----------------------------------------------------------------------
Christophe Zwecker                email:      doc@rrz.uni-hamburg.de
Hamburg, Germany                    fax:      49 40 22715433  
----------------------------------------------------------------------

In newsgroups please reply also by email - thanks