wierd notify problem

[ninja@hutch.com.au (Anthony Green (HTAL))]

Hey all,

	having this wierd notify problem with faxmail .. basically it fails to send
the notify email becuase sendmail says "no recipient address in header" ...

heres some logs ..

Aug  4 21:13:57 hutsfax1 sendmail[10624]: VAA10624: from=<ninja@hutch.com.au>, size=574, class=0, pri=30574, nrcpts=1, msgid=<199708041114.VAA01067@hutch.com.au>, proto=ESMTP, relay=ninja@hutch.com.au [203.12.80.1]
Aug  4 21:14:03 hutsfax1 FaxQueuer[13119]: SUBMIT JOB 39
Aug  4 21:14:08 hutsfax1 sendmail[10638]: VAA10638: Authentication-Warning: hutsfax1.hutch.com.au: bin set sender to faxserver using -f
Aug  4 21:14:09 hutsfax1 sendmail[10626]: VAA10624: to=<99644656@fax.hutch.com.au>, delay=00:00:13, xdelay=00:00:11, mailer=fax2, relay=fax2, stat=Sent
Aug  4 21:14:08 hutsfax1 sendmail[10638]: VAA10638: from=faxserver, size=461, class=0, pri=30461, nrcpts=1, msgid=<199708041114.VAA10638@hutsfax1.hutch.com.au>, relay=bin@localhost
Aug  4 21:14:13 hutsfax1 sendmail[10640]: VAA10638: to=Ninja <ninja@hutch.com.au> (+61 2 99644656), delay=00:00:05, xdelay=00:00:04, mailer=esmtp, relay=hutch.com.au. [203.12.80.1], stat=Sent (VAA01078 Message accepted for delivery)
Aug  4 21:14:18 hutsfax1 FaxSend[10641]: MODEM ROCKWELL AC/V34/V1.309-V34_DS
Aug  4 21:14:18 hutsfax1 FaxSend[10641]: SEND FAX: JOB 39 DEST 99644656 COMMID 00000060
Aug  4 21:15:04 hutsfax1 FaxQueuer[13119]: NOTIFY: bin/notify "doneq/q39" "done" "0:55"
Aug  4 21:15:04 hutsfax1 sendmail[10647]: VAA10647: Authentication-Warning: hutsfax1.hutch.com.au: uucp set sender to faxserver using -f
Aug  4 21:15:05 hutsfax1 sendmail[10647]: VAA10647: from=faxserver, size=104, class=0, pri=104, nrcpts=0, msgid=<199708041115.VAA10647@hutsfax1.hutch.com.au>, relay=uucp@localhost
Aug  4 21:15:05 hutsfax1 sendmail[10647]: VAA10647: VAB10647: DSN: No recipient addresses found in header
Aug  4 21:15:06 hutsfax1 sendmail[10651]: VAB10647: to=faxman, delay=00:00:01, xdelay=00:00:01, mailer=local, stat=Sent

heres the files and permissions :

hutsfax1:/var/spool/fax/bin# ls -al notify*
-rwxr-xr-x   1 uucp     root          484 Aug  4 21:49 notify
-r-xr-xr-x   1 uucp     root         6702 Aug  1 11:00 notify.awk

even tried these with setuid uucp and setuid root .. still didnt work :/

hutsfax1:/usr/local/bin# ls -al faxma*
-rwxr-xr-x   1 root     root       316148 Jul 14 15:45 faxmail
-r-xr-xr-x   1 uucp     root         4352 Jul 26 15:45 faxmailer
-rwxr-xr-x   1 uucp     daemon      18599 Jul 30 13:45 faxmailer-agent


I dont know whats going on ..  as root if i go into /var/spool/fax and run
notify from the command line like :

hutsfax1:/var/spool/fax# bin/notify "doneq/q39" "done" "0:55"

Aug  4 21:59:24 hutsfax1 sendmail[10891]: VAA10891: from=faxserver, size=183, class=0, pri=30183, nrcpts=1, msgid=<199708041159.VAA10891@hutsfax1.hutch.com.au>, relay=root@localhost
Aug  4 21:59:27 hutsfax1 sendmail[10896]: VAA10891: to=ninja@hutch.com.au, delay=00:00:03, xdelay=00:00:03, mailer=esmtp, relay=hutch.com.au. [203.12.80.1], stat=Sent (WAA01261 Message accepted for delivery)

the damn thing works :/

output that faxman gets email from the email failing is :

#### start email 

>From MAILER-DAEMON@hutsfax1.hutch.com.au  Wed Feb 17 13:55:30 1999
Date: Mon, 4 Aug 1997 21:48:52 +1000
From: Mail Delivery Subsystem <MAILER-DAEMON@hutsfax1.hutch.com.au>
To: faxserver@hutsfax1.hutch.com.au
Subject: Returned mail: No recipient addresses found in header


The original message was received at Mon, 4 Aug 1997 21:48:52 +1000
from uucp@localhost

   ----- Transcript of session follows -----
501 No recipient addresses found in header

....

>From faxserver  Wed Feb 17 13:55:30 1999
Date: Mon, 4 Aug 1997 21:48:52 +1000
>From: faxserver

Sorry, there was a problem sending notification;
something went wrong in the shell script bin/notify.

#### end email 

Everything including the email gateway works .. the fax gets through .. the notify
script doesnt run properly ... permissions problem mayybe?

Also, i keep getting various errors sending .ps files ... ghostscript complaining
about not enuf memory for job (looked at FAQ .. removed VM tag) .. then got some
other error about language level 2 error...

So .. if anyone wants to give me a url of a .ps file that definately is the right
language level .. no Vm errors and whatever .. i'll try and run that through the 
server =)

Any help would be appreciated ...

Regards,

-- 
ninja@hutch.com.au
Anthony Green

Hutchison Internet					Level 1, 40 Pacific Highway
Technical Sales Consultant				St Leonards NSW 2065
Hutchison Telecommunications (Australia) Limited	Phone: +61-2-99644888
Telecommunications from Hutchison Whampoa Limited	Fax:   +61-2-99644848