 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Failure rate of Faxes
- To: flexfax@sgi.com
- Subject: Failure rate of Faxes
- From: Aidan Van Dyk <aidan@magma.ca>
- Date: Wed, 21 May 1997 13:50:49 -0400
I have HylaFAX 4.0 installed on a Linux machine (2.0.30).
I am using it to send Postscript files out to other machines. Many faxes
work fine, but many also don't. I am useing a Practical Periphial PnP 33.6
for send-only environment. I get about 33% failure rate, all with the
following error:
Your facsimile job to 231-3191 failed because:
No response to MPS repeated 3 times; too many attempts to send
And the following log:
May 21 11:37:51.62: [ 7495]: SESSION BEGIN 00000784 16132313191
May 21 11:37:51.62: [ 7495]: SEND FAX: JOB 354 DEST 231-3191 COMMID 00000784
May 21 11:37:51.62: [ 7495]: DELAY 2600 ms
May 21 11:37:54.23: [ 7495]: <-- [15:ATE0V1Q0S0=0H0\r]
May 21 11:37:54.24: [ 7495]: --> [2:OK]
May 21 11:37:54.24: [ 7495]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
May 21 11:37:54.25: [ 7495]: --> [2:OK]
May 21 11:37:54.25: [ 7495]: <-- [12:AT+FCLASS=2\r]
May 21 11:37:54.26: [ 7495]: --> [2:OK]
May 21 11:37:54.26: [ 7495]: <-- [10:AT+FTBC=0\r]
May 21 11:37:54.27: [ 7495]: --> [2:OK]
May 21 11:37:54.27: [ 7495]: <-- [10:AT+FBOR=0\r]
May 21 11:37:54.28: [ 7495]: --> [2:OK]
May 21 11:37:54.28: [ 7495]: <-- [13:AT+FPHCTO=60\r]
May 21 11:37:54.29: [ 7495]: --> [2:OK]
May 21 11:37:54.29: [ 7495]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
May 21 11:37:54.30: [ 7495]: --> [2:OK]
May 21 11:37:54.30: [ 7495]: <-- [5:ATM0\r]
May 21 11:37:54.31: [ 7495]: --> [2:OK]
May 21 11:37:54.31: [ 7495]: <-- [12:AT+FCLASS=2\r]
May 21 11:37:54.42: [ 7495]: --> [2:OK]
May 21 11:37:54.42: [ 7495]: <-- [10:AT+FTBC=0\r]
May 21 11:37:54.53: [ 7495]: --> [2:OK]
May 21 11:37:54.53: [ 7495]: <-- [10:AT+FBOR=0\r]
May 21 11:37:54.67: [ 7495]: --> [2:OK]
May 21 11:37:54.67: [ 7495]: <-- [13:AT+FPHCTO=60\r]
May 21 11:37:54.78: [ 7495]: --> [2:OK]
May 21 11:37:54.78: [ 7495]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
May 21 11:37:54.90: [ 7495]: --> [2:OK]
May 21 11:37:54.90: [ 7495]: <-- [31:AT+FLID="Magma Communications"\r]
May 21 11:37:55.02: [ 7495]: --> [2:OK]
May 21 11:37:55.02: [ 7495]: DIAL 92313191
May 21 11:37:55.02: [ 7495]: <-- [13:ATDT92313191\r]
May 21 11:38:14.80: [ 7495]: --> [5:+FCON]
May 21 11:38:17.59: [ 7495]: --> [29:+FCSI: " 613 231 3191"]
May 21 11:38:17.59: [ 7495]: REMOTE CSI "613 231 3191"
May 21 11:38:17.96: [ 7495]: --> [22:+FDIS: 1,3,0,2,1,0,0,2]
May 21 11:38:17.96: [ 7495]: --> [2:OK]
May 21 11:38:17.96: [ 7495]: REMOTE best rate 9600 bit/s
May 21 11:38:17.96: [ 7495]: REMOTE max page width 1728 pixels in 215 mm
May 21 11:38:17.96: [ 7495]: REMOTE max unlimited page length
May 21 11:38:17.96: [ 7495]: REMOTE best vres 7.7 line/mm
May 21 11:38:17.96: [ 7495]: REMOTE best format 2-D MR
May 21 11:38:17.96: [ 7495]: REMOTE best 10 ms, 5 ms/scanline
May 21 11:38:17.96: [ 7495]: USE 9600 bit/s
May 21 11:38:17.96: [ 7495]: USE 10 ms, 5 ms/scanline
May 21 11:38:17.96: [ 7495]: SEND file "docq/doc354.cover;31"
May 21 11:38:18.05: [ 7495]: USE page width 1728 pixels in 215 mm
May 21 11:38:18.05: [ 7495]: USE unlimited page length
May 21 11:38:18.05: [ 7495]: USE 7.7 line/mm
May 21 11:38:18.05: [ 7495]: USE 1-D MR
May 21 11:38:18.05: [ 7495]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,2\r]
May 21 11:38:18.17: [ 7495]: --> [2:OK]
May 21 11:38:18.17: [ 7495]: <-- [7:AT+FDT\r]
May 21 11:38:24.68: [ 7495]: --> [22:+FDCS: 1,3,0,2,0,0,0,1]
May 21 11:38:24.68: [ 7495]: --> [7:CONNECT]
May 21 11:38:24.68: [ 7495]: SEND wait for XON
May 21 11:38:24.68: [ 7495]: --> [1:]
May 21 11:38:24.68: [ 7495]: SEND begin page
May 21 11:38:51.43: [ 7495]: SENT 32493 bytes of data
May 21 11:38:51.43: [ 7495]: SEND end page
May 21 11:38:58.46: [ 7495]: --> [2:OK]
May 21 11:38:58.46: [ 7495]: SEND send MPS (more pages, same document)
May 21 11:38:58.48: [ 7495]: <-- [9:AT+FET=0\r]
May 21 11:39:01.34: [ 7495]: --> [8:+FPTS: 1]
May 21 11:39:01.34: [ 7495]: --> [2:OK]
May 21 11:39:01.34: [ 7495]: SEND recv MCF (message confirmation)
May 21 11:39:01.34: [ 7495]: SEND FAX (00000784): FROM laflinv@magma.ca TO
231-3191 (page 1 of 6 sent in 0:44)
May 21 11:39:01.34: [ 7495]: SEND FAX (00000784): FROM laflinv@magma.ca TO
231-3191 (docq/doc354.cover;31 sent in 0:44)
May 21 11:39:01.37: [ 7495]: SEND file "docq/doc983.ps;31"
May 21 11:39:01.49: [ 7495]: USE page width 1728 pixels in 215 mm
May 21 11:39:01.49: [ 7495]: USE unlimited page length
May 21 11:39:01.49: [ 7495]: USE 7.7 line/mm
May 21 11:39:01.49: [ 7495]: USE 1-D MR
May 21 11:39:01.49: [ 7495]: <-- [7:AT+FDT\r]
May 21 11:39:02.42: [ 7495]: --> [7:CONNECT]
May 21 11:39:02.42: [ 7495]: SEND wait for XON
May 21 11:39:02.42: [ 7495]: --> [1:]
May 21 11:39:02.42: [ 7495]: SEND begin page
May 21 11:39:46.49: [ 7495]: SENT 53906 bytes of data
May 21 11:39:46.49: [ 7495]: SEND end page
May 21 11:39:52.09: [ 7495]: --> [2:OK]
May 21 11:39:52.09: [ 7495]: SEND send MPS (more pages, same document)
May 21 11:39:52.09: [ 7495]: <-- [9:AT+FET=0\r]
May 21 11:39:54.85: [ 7495]: --> [8:+FPTS: 3]
May 21 11:39:54.96: [ 7495]: --> [2:OK]
May 21 11:39:54.96: [ 7495]: SEND recv RTP (retrain positive)
May 21 11:39:54.96: [ 7495]: SEND FAX (00000784): FROM laflinv@magma.ca TO
231-3191 (page 2 of 6 sent in 0:53)
May 21 11:39:54.96: [ 7495]: SEND FAX (00000784): FROM laflinv@magma.ca TO
231-3191 (docq/doc983.ps;31 sent in 0:53)
May 21 11:39:54.98: [ 7495]: SEND file "docq/doc984.ps;31"
May 21 11:39:54.99: [ 7495]: USE page width 1728 pixels in 215 mm
May 21 11:39:54.99: [ 7495]: USE unlimited page length
May 21 11:39:54.99: [ 7495]: USE 7.7 line/mm
May 21 11:39:54.99: [ 7495]: USE 1-D MR
May 21 11:39:55.00: [ 7495]: <-- [7:AT+FDT\r]
May 21 11:40:07.22: [ 7495]: --> [22:+FDCS: 1,2,0,2,0,0,0,1]
May 21 11:40:07.22: [ 7495]: --> [7:CONNECT]
May 21 11:40:07.22: [ 7495]: SEND wait for XON
May 21 11:40:07.22: [ 7495]: --> [1:]
May 21 11:40:07.22: [ 7495]: SEND begin page
May 21 11:40:57.47: [ 7495]: SENT 48524 bytes of data
May 21 11:40:57.47: [ 7495]: SEND end page
May 21 11:41:03.77: [ 7495]: --> [2:OK]
May 21 11:41:03.77: [ 7495]: SEND send MPS (more pages, same document)
May 21 11:41:03.77: [ 7495]: <-- [9:AT+FET=0\r]
May 21 11:41:17.57: [ 7495]: --> [9:+FHNG: 52]
May 21 11:41:17.57: [ 7495]: REMOTE HANGUP: No response to MPS repeated 3
times (code 52)
May 21 11:41:17.57: [ 7495]: SEND FAILED: No response to MPS repeated 3
times; too many attempts to send
May 21 11:41:17.57: [ 7495]: <-- [5:ATH0\r]
May 21 11:41:18.25: [ 7495]: --> [2:OK]
May 21 11:41:18.25: [ 7495]: SESSION END
Here, the first 2 pages supposedly went though fine, and then the other
machine just Hung up?? what gives? Is this a problem with my fax/modem, or
just a configuration problem, or a compatibility with other machines? I
have noticed that this comes up frequently on this list, but haven't found
any solutions that have helped solve the problem on this end.
Aidan Van Dyk aidan@magma.ca
-------------------------------------------------------------------
Magma Communications Ltd. Internet Service for the Ottawa Region
Unit 201 Phone: (613) 228-3565
52 Antares Drive Fax: (613) 228-8313
Nepean, ON Web URL: http://www.magma.ca/
K2E 7Z1 E-mail: aidan@magma.ca
- Prev by Date: Re: Human Process questions (not code questions ;)
- Next by Date: Re: irix modem problems
- Prev by thread: Re: INFO: layout of xferlog file
- Next by thread: Re: irix modem problems
- Index(es):
Project hosted by iFAX Solutions