Facsimiles are not arriving at destinati

[Gerd.Prokasky@ska.com (Prokasky)]

Hi!

am running HylaFAX 4.0pl1 on a Solaris 2.5 platform using a Motorola 28.8 Class
1 modem. Every things seems to work fine but...

Facsimiles are transmitted from the Windows clients to the HylaFAX server. The
modem is dailing and it seems to me data is transmitted to the remote fax
machine. But in reality facsimiles are not arriving at the destination.

The send log shows following messages:

May 14 08:45:06.83: [  470]: SESSION BEGIN 00000011 75382700
May 14 08:45:06.83: [  470]: SEND FAX: JOB 10 DEST 075382700 COMMID 00000011
May 14 08:45:06.83: [  470]: DELAY 2600 ms
May 14 08:45:09.44: [  470]: <-- [15:ATE0V1Q0S0=0H0\r]
May 14 08:45:09.49: [  470]: --> [14:ATE0V1Q0S0=0H0]
May 14 08:45:09.49: [  470]: --> [2:OK]
May 14 08:45:09.49: [  470]: <-- [23:ATS8=2S7=60&R\Q3&D3&C1\r]
May 14 08:45:09.54: [  470]: --> [2:OK]
May 14 08:45:09.54: [  470]: <-- [12:AT+FCLASS=1\r]
May 14 08:45:09.55: [  470]: --> [2:OK]
May 14 08:45:09.55: [  470]: <-- [9:AT+FAA=1\r]
May 14 08:45:09.56: [  470]: --> [2:OK]
May 14 08:45:09.56: [  470]: <-- [7:ATL0M1\r]
May 14 08:45:09.57: [  470]: --> [2:OK]
May 14 08:45:09.58: [  470]: <-- [12:AT+FCLASS=1\r]
May 14 08:45:09.70: [  470]: --> [2:OK]
May 14 08:45:09.70: [  470]: DIAL 075382700
May 14 08:45:09.70: [  470]: <-- [5:ATX3\r]
May 14 08:45:09.82: [  470]: --> [2:OK]
May 14 08:45:09.82: [  470]: <-- [14:ATDT075382700\r]
May 14 08:45:28.41: [  470]: --> [7:CONNECT]
May 14 08:45:35.42: [  470]: <-- data [1]
May 14 08:45:35.63: [  470]: MODEM <Timeout>
May 14 08:45:35.63: [  470]: DELAY 200 ms
May 14 08:45:35.83: [  470]: <-- [9:AT+FRH=3\r]
May 14 08:45:36.68: [  470]: --> [7:CONNECT]
May 14 08:45:38.35: [  470]: --> [2:OK]
May 14 08:45:38.35: [  470]: <-- [9:AT+FRH=3\r]
May 14 08:45:38.37: [  470]: --> [7:CONNECT]
May 14 08:45:39.05: [  470]: --> [2:OK]
May 14 08:45:39.05: [  470]: REMOTE CSI "+49 69 75382700"
May 14 08:45:39.05: [  470]: <-- [9:AT+FRH=3\r]
May 14 08:45:39.07: [  470]: --> [7:CONNECT]
May 14 08:45:39.32: [  470]: --> [2:OK]
May 14 08:45:39.32: [  470]: REMOTE best rate 9600 bit/s
May 14 08:45:39.32: [  470]: REMOTE max page width 1728 pixels in 215 mm
May 14 08:45:39.32: [  470]: REMOTE max unlimited page length
May 14 08:45:39.32: [  470]: REMOTE best vres 7.7 line/mm
May 14 08:45:39.32: [  470]: REMOTE best format 2-D MR
May 14 08:45:39.32: [  470]: REMOTE supports T.30 Annex A, ECM
May 14 08:45:39.32: [  470]: REMOTE best 20 ms, 10 ms/scanline
May 14 08:45:39.32: [  470]: USE 9600 bit/s
May 14 08:45:39.32: [  470]: USE 20 ms, 10 ms/scanline
May 14 08:45:39.33: [  470]: <-- [9:AT+FTH=3\r]
May 14 08:45:39.36: [  470]: --> [7:CONNECT]
May 14 08:45:39.36: [  470]: <-- data [3]
May 14 08:45:39.36: [  470]: <-- data [2]
May 14 08:45:40.74: [  470]: --> [2:OK]
May 14 08:45:40.75: [  470]: <-- [5:ATH0\r]
May 14 08:45:40.89: [  470]: --> [2:OK]
May 14 08:45:40.89: [  470]: SESSION END

Is there anybody háving experience with constellations like this.

Many thanks for responses

-- 
Gerd Prokasky
Front Office Technical Services (FOTS)

Credit|First
Suisse|Boston

Messeturm
60308 Frankfurt
Germany

Phone: +49 (69) 7538 2641	
Fax  : +49 (69) 7538 2700
email:  gerd.prokasky@ska.com