Re: HylaFAX vs USR Courier I modem [problem solved]

[Ingo Ciechowski <ciechowski@cis-computer.com>]

At 20:12 Uhr +0200 12.05.1997, Matthias.Apitz@SOFTCON.de wrote:


> Ingo Ciechowski wrote:
>
>     After adding an ATE0 command to my courier i modems configuration (i.e.
>     disabling the modem echo) everything's working fine now ;-))
>
> What do you mean exactly by "to my i modems configuration"?
> Your original posting included the E0 command already:
>
>     May 10 11:49:34.41: [ 8102]: SESSION BEGIN 00000011 496732333
>     May 10 11:49:34.42: [ 8102]: SEND FAX: JOB 1 DEST 333 COMMID 00000011
>     May 10 11:49:34.42: [ 8102]: DELAY 2600 ms
>     May 10 11:49:37.02: [ 8102]: <-- [17:ATE0V1Q0X4S0=0H0\r]
>                                            ^^
>     May 10 11:49:42.02: [ 8102]: MODEM <Timeout>
>
> Again, the real problem is why your modem can't see or answer
> to the sequence "ATE0V1Q0X4S0=0H0\r"

it can - at least if i connect to it manually.
But you're right in that it still doesn't accept this setting at session begin.

However I added the ATE0 setting to the ATM0 sequence and that worked fine
- although beeing a workaround...



Ingo
ciechowski@cis-computer.com

--
CCCC I SSSS Ingo Ciechowski            | phone   : +49.6732.9411-26
C    I S    Ober-Saulheimer Strasse 18 | fax     : +49.6732.9411-333
C    I  SSS D-55286  Woerrstadt        | business: CIS-Computer GmbH
CCCC I Gmbh Germany                    | email   : info@cis-computer.com
 PGP-Key @ http://www.cis-computer.com/mitarbeiter/ciechowski/pgp.asc