HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

modem timeout at higher baud



supra 28.8 VFC fax modem
redhat linux 4.0  on a 486 pc

If I leave the ModemRate: at 19200 it works HylaFax works fine. But if I
change the rate to 38400 or 115200 I get modem timeout. I need to set it
to a higher baud for incoming data calls but faxgetty doesn't like it.

 FaxGetty[11582]: MODEM set DTR OFF
 FaxGetty[11582]: MODEM set DTR ON
 FaxGetty[11582]: MODEM set baud rate: 115200 baud, input flow RTS/CTS,
output flow RTS/CTS
 FaxGetty[11582]: MODEM flush i/o
 FaxGetty[11582]: <-- [18:AT&F2E0V1Q0S0=0H0\r]
 FaxGetty[11582]: <-- <17:41 54 26 46 32 45 30 56 31 51 30 53 30 3D 30 48
30>
 FaxGetty[11582]: <-- <1:0D>
 FaxGetty[11582]: --> <6:0D 0A 4F 4B 0D 0A>
 FaxGetty[11582]: --> [2:OK]
 FaxGetty[11582]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
 FaxGetty[11582]: <-- <20:41 54 53 38 3D 32 53 37 3D 36 30 26 4B 33 26 44
33 26 43 31>
 FaxGetty[11582]: <-- <1:0D>
 FaxGetty[11582]: MODEM TIMEOUT: reading line from modem
 FaxGetty[11582]: MODEM <Timeout>
 FaxGetty[11582]: MODEM set DTR OFF




Project hosted by iFAX Solutions