Waiting for modem to come ready

["Bernd Duerrer" <duerrer@aea.ruhr-uni-bochum.de>]

Configuration: HylaFAX v4.0pl1 under SunOS 4.1.3 with gcc 2.7.2.1

When running faxstat, I always get the message "Waiting for modem to come
ready". The modem works fine when I use an UNIX command like tip. When both
hfaxd and  faxq are running and I start faxgetty manually, the log shows
the following:

Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM WEDGED: bin/wedged "cua0"
"/dev/cua0"
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM WEDGED: bin/wedged "cua0"
"/dev/cua0"
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM WEDGED: bin/wedged "cua0"
"/dev/cua0"

I would be grateful for any hints to get it to work.

By the way: the LogFacility entry in the hfaxd.conf file seems to be
ignored: when I start hfaxd the startup messages

Apr 21 18:26:44 ftp HylaFAX[148]: HylaFAX SNPP Protocol Server: restarted.
Apr 21 18:26:44 ftp HylaFAX[148]: HylaFAX INET Protocol Server: restarted.

are written to the log file I use for daemon logging.

Regards,

Bernd

----------------------------------------------------------------------------
---
Dipl.-Ing. Bernd Duerrer
Institute of Communication Acoustics
IC 1/132
Ruhr-Universitaet Bochum
44780 Bochum, Germany
Tel.: +49-234-700-3481
Fax: +49-234-7094-165
e-mail: duerrer@aea.ruhr-uni-bochum.de