No response to MPS repeated 3 times

["Ing. Richard Lutsch" <lut@porsche.co.at>]

HylaFAX v4.0pl0 under AIX 4.1 (smitt installable version from
www.bull.de); GVC 14400 (MODEM EXAR ROCKWELL 144DP/E.C Version 7.1)

With some fax machines I get the following error:

"No response to MPS repeated 3 times (code 52)"

I looked to the FAQ, but didn't find something. Please, don't complain
about me, if i overlooked something in the FAQ :-)

Regards,

   Richard

P.S: I tried the same modem one year ago with hylafax Version 3.x and
AIX 3.2.5 with xlC and had the same problem with the same fax machine.
Apr 15 18:15:58.73: [24544]: SESSION BEGIN 00000019 004366227
Apr 15 18:15:58.73: [24544]: SEND FAX: JOB 30 DEST 27 COMMID 00000019
Apr 15 18:15:58.73: [24544]: DELAY 2600 ms
Apr 15 18:16:01.34: [24544]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 15 18:16:01.94: [24544]: --> [2:OK]
Apr 15 18:16:01.94: [24544]: <-- [30:ATS8=2S7=60&S1\G0\Q4\X1&D2&C1\r]
Apr 15 18:16:02.19: [24544]: --> [2:OK]
Apr 15 18:16:02.19: [24544]: <-- [12:AT+FCLASS=2\r]
Apr 15 18:16:02.42: [24544]: --> [2:OK]
Apr 15 18:16:02.42: [24544]: <-- [10:AT+FTBC=0\r]
Apr 15 18:16:02.65: [24544]: --> [5:ERROR]
Apr 15 18:16:02.65: [24544]: MODEM Command error
Apr 15 18:16:02.65: [24544]: <-- [10:AT+FBOR=0\r]
Apr 15 18:16:02.89: [24544]: --> [2:OK]
Apr 15 18:16:02.89: [24544]: <-- [13:AT+FPHCTO=30\r]
Apr 15 18:16:03.12: [24544]: --> [5:ERROR]
Apr 15 18:16:03.12: [24544]: MODEM Command error
Apr 15 18:16:03.12: [24544]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 15 18:16:03.36: [24544]: --> [2:OK]
Apr 15 18:16:03.36: [24544]: <-- [7:ATL1M1\r]
Apr 15 18:16:03.59: [24544]: --> [2:OK]
Apr 15 18:16:03.62: [24544]: <-- [12:AT+FCLASS=2\r]
Apr 15 18:16:03.95: [24544]: --> [2:OK]
Apr 15 18:16:03.95: [24544]: <-- [10:AT+FTBC=0\r]
Apr 15 18:16:04.28: [24544]: --> [5:ERROR]
Apr 15 18:16:04.28: [24544]: MODEM Command error
Apr 15 18:16:04.28: [24544]: <-- [10:AT+FBOR=0\r]
Apr 15 18:16:04.61: [24544]: --> [2:OK]
Apr 15 18:16:04.62: [24544]: <-- [13:AT+FPHCTO=30\r]
Apr 15 18:16:04.95: [24544]: --> [5:ERROR]
Apr 15 18:16:04.95: [24544]: MODEM Command error
Apr 15 18:16:04.95: [24544]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 15 18:16:05.29: [24544]: --> [2:OK]
Apr 15 18:16:05.29: [24544]: <-- [29:AT+FLID="Porsche Informatik"\r]
Apr 15 18:16:05.63: [24544]: --> [2:OK]
Apr 15 18:16:05.63: [24544]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
Apr 15 18:16:05.97: [24544]: --> [2:OK]
Apr 15 18:16:05.98: [24544]: DIAL 27
Apr 15 18:16:05.98: [24544]: <-- [8:ATDT27@\r]
Apr 15 18:16:24.70: [24544]: --> [5:+FCON]
Apr 15 18:16:24.71: [24544]: --> [112:+FNSF: 00 00 11 80 00 80 5B 10 45 58 54 45 52 4E 41 2E 20 20 20 20 20 20 20 20 01 0F 00 27 00 80 80 80 02 01 01 ]
Apr 15 18:16:24.71: [24544]: REMOTE NSF " 00 00 11 80 00 80 5B 10 45 58 54 45 52 4E 41 2E 20 20 20 20 20 20 20 20 01 0F 00 27 00 80 80 80 02 01 01"
Apr 15 18:16:24.84: [24544]: --> [29:+FCSI: "      43 662 4670 27"]
Apr 15 18:16:24.84: [24544]: REMOTE CSI "43 662 4670 27"
Apr 15 18:16:24.84: [24544]: --> [22:+FDIS: 1,3,0,2,0,2,0,5]
Apr 15 18:16:24.85: [24544]: --> [2:OK]
Apr 15 18:16:24.85: [24544]: REMOTE best rate 9600 bit/s
Apr 15 18:16:24.85: [24544]: REMOTE max page width 1728 pixels in 215 mm
Apr 15 18:16:24.85: [24544]: REMOTE max unlimited page length 
Apr 15 18:16:24.85: [24544]: REMOTE best vres 7.7 line/mm
Apr 15 18:16:24.85: [24544]: REMOTE best format 1-D MR
Apr 15 18:16:24.85: [24544]: REMOTE supports T.30 Annex C, half duplex ECM
Apr 15 18:16:24.85: [24544]: REMOTE best 20 ms/scanline
Apr 15 18:16:24.85: [24544]: USE 9600 bit/s
Apr 15 18:16:24.85: [24544]: USE 20 ms/scanline
Apr 15 18:16:24.85: [24544]: SEND file "docq/doc30.cover;00"
Apr 15 18:16:24.86: [24544]: USE page width 1728 pixels in 215 mm
Apr 15 18:16:24.86: [24544]: USE unlimited page length 
Apr 15 18:16:24.86: [24544]: USE 3.85 line/mm
Apr 15 18:16:24.86: [24544]: USE 1-D MR
Apr 15 18:16:24.86: [24544]: <-- [7:AT+FDT\r]
Apr 15 18:16:31.00: [24544]: --> [22:+FDCS: 0,3,0,2,0,0,0,5]
Apr 15 18:16:32.69: [24544]: --> [7:CONNECT]
Apr 15 18:16:32.69: [24544]: SEND wait for XON
Apr 15 18:16:32.69: [24544]: --> [1:]
Apr 15 18:16:32.69: [24544]: SEND begin page
Apr 15 18:16:32.70: [24544]: <-- data [1028]
Apr 15 18:16:32.70: [24544]: <-- data [1036]
Apr 15 18:16:32.70: [24544]: <-- data [1030]
Apr 15 18:16:32.70: [24544]: <-- data [1036]
Apr 15 18:16:32.71: [24544]: <-- data [1050]
Apr 15 18:16:32.71: [24544]: <-- data [1042]
Apr 15 18:16:34.31: [24544]: <-- data [1050]
Apr 15 18:16:34.31: [24544]: <-- data [1051]
Apr 15 18:16:36.01: [24544]: <-- data [1043]
Apr 15 18:16:36.01: [24544]: <-- data [1044]
Apr 15 18:16:37.72: [24544]: <-- data [1036]
Apr 15 18:16:37.73: [24544]: <-- data [1025]
Apr 15 18:16:39.44: [24544]: <-- data [570]
Apr 15 18:16:39.45: [24544]: SENT 12858 bytes of data
Apr 15 18:16:39.45: [24544]: <-- data [2]
Apr 15 18:16:43.26: [24544]: SEND end page
Apr 15 18:16:43.53: [24544]: --> [2:OK]
Apr 15 18:16:43.53: [24544]: SEND send MPS (more pages, same document)
Apr 15 18:16:43.53: [24544]: <-- [9:AT+FET=0\r]
Apr 15 18:17:01.23: [24544]: --> [9:+FHNG: 52]
Apr 15 18:17:01.23: [24544]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52)
Apr 15 18:17:01.23: [24544]: <-- [5:ATH0\r]
Apr 15 18:17:01.23: [24544]: --> [2:OK]
Apr 15 18:17:01.24: [24544]: SESSION END