squished faxes when receiving a fax

[High Mercury <merc@icanect.net>]

I am using a multitech2834MR modem to receive faxes and when I receive
a fax using 4.0pl1, they only take up half the page. Here is the log of the
reception:

Apr 15 03:18:59.92: [15867]: <-- [4:ATA\r]
Apr 15 03:19:08.65: [15867]: --> [5:+FCON]
Apr 15 03:19:08.66: [15867]: ANSWER: FAX CONNECTION
Apr 15 03:19:08.70: [15867]: RECV FAX: begin
Apr 15 03:19:13.85: [15867]: --> [28:+FTSI:"          xxxxxxxxxxx"]
Apr 15 03:19:13.85: [15867]: REMOTE TSI "xxxxxxxxxxx"
Apr 15 03:19:13.85: [15867]: --> [21:+FDCS:0,5,0,2,0,0,0,1]
Apr 15 03:19:13.85: [15867]: REMOTE wants 14400 bit/s
Apr 15 03:19:13.85: [15867]: REMOTE wants page width 1728 pixels in 215 mm
Apr 15 03:19:13.85: [15867]: REMOTE wants unlimited page length 
Apr 15 03:19:13.85: [15867]: REMOTE wants 3.85 line/mm
Apr 15 03:19:13.85: [15867]: REMOTE wants 1-D MR
Apr 15 03:19:13.85: [15867]: REMOTE wants 1-D MR
Apr 15 03:19:13.85: [15867]: --> [2:OK]
Apr 15 03:19:13.85: [15867]: <-- [7:AT+FDR\r]
Apr 15 03:19:15.35: [15867]: --> [5:+FCFR]
Apr 15 03:19:15.35: [15867]: --> [28:+FTSI:"          xxxxxxxxxxx"]
Apr 15 03:19:15.35: [15867]: REMOTE TSI "xxxxxxxxxxx"
Apr 15 03:19:15.35: [15867]: --> [21:+FDCS:0,5,0,2,0,0,0,1]
Apr 15 03:19:15.35: [15867]: REMOTE wants 14400 bit/s
Apr 15 03:19:15.35: [15867]: REMOTE wants page width 1728 pixels in 215 mm
Apr 15 03:19:15.35: [15867]: REMOTE wants unlimited page length 
Apr 15 03:19:15.35: [15867]: REMOTE wants 1-D MR
Apr 15 03:19:16.04: [15867]: --> [7:CONNECT]
Apr 15 03:19:16.04: [15867]: RECV: begin page
Apr 15 03:19:16.04: [15867]: RECV: send trigger 022
Apr 15 03:19:16.04: [15867]: <-- data [1]
Apr 15 03:19:34.41: [15867]: RECV: 32763 bytes of data, 898 total lines
Apr 15 03:19:35.55: [15867]: RECV: 1446 bytes of data, 1058 total lines
Apr 15 03:19:35.56: [15867]: --> [18:+FPTS:1,1058,0,0,0]
Apr 15 03:19:36.76: [15867]: --> [6:+FET:2]
Apr 15 03:19:36.78: [15867]: RECV recv EOP (no more pages or documents)
Apr 15 03:19:36.78: [15867]: --> [2:OK]
Apr 15 03:19:36.78: [15867]: RECV send MCF (message confirmation)
3, INF, 3.85 line/mm, 1-D MR
2227, route to <unspecified>, 1 pages in 0:28
Apr 15 03:19:36.83: [15867]: <-- [7:AT+FDR\r]
Apr 15 03:19:39.68: [15867]: --> [7:+FHNG:0]

I've noticed that it is only squished when I receive the fax in standard mode
(not fine).  When I receive the fax in fine mode and receive it, it takes up
most of the page (except for about a one inch solid black strip towards the 
very bottom).  However, when I receive the fax in standard it takes up about 
half the page with the rest of the page totally black.  I have tried putting
in the Class2DDISCmd: AT+FDIS command in the per modem config files but that
has not affected the received fax.  I send faxes through this modem in both 
standard and fine mode to a fax machine and they take up the whole page like 
they should.  But when I receive a fax in standard mode it only takes up 
about half the page.  

Anyone have any ideas on how to fix this problem???

thanks

merc