![]() |
Everyone, I have run into a problem that I'm hoping can be fixed by a configuration change. If a fax machine that I am sending to runs out of paper after the fax has started but before it has finished the fax job on my end aborts as a failed fax. Is there any way to make the fax retry sending at some later time from the page that it was doing when the receiving fax ran out of paper. I can resend the entire document, but some of my documents are 30 plus pages and they stop on the last page. There is no reason to resend the pages that have already been sent! Thanks in advance for any and all help. I am including the logtrace incase that will help. The NAK with operator interventaion was the fax machine running out of paper! ---->>>> snip Apr 08 08:54:22.21: [25814]: SEND FAX (00000834): FROM carsons@server.carsonsofhp.com TO 18474324447 (page 5 of 7 sent in 0:38) Apr 08 08:54:22.21: [25814]: USE page width 1728 pixels in 215 mm Apr 08 08:54:22.21: [25814]: USE unlimited page length Apr 08 08:54:22.21: [25814]: USE 3.85 line/mm Apr 08 08:54:22.21: [25814]: USE 1-D MR Apr 08 08:54:22.21: [25814]: <-- [7:AT+FDT\r] Apr 08 08:54:22.45: [25814]: --> [7:CONNECT] Apr 08 08:54:22.45: [25814]: SEND wait for XON Apr 08 08:54:22.45: [25814]: --> [1:] Apr 08 08:54:22.45: [25814]: SEND begin page Apr 08 08:54:46.34: [25814]: SENT 17544 bytes of data Apr 08 08:54:47.52: [25814]: SEND end page Apr 08 08:54:50.70: [25814]: --> [2:OK] Apr 08 08:54:50.70: [25814]: SEND send MPS (more pages, same document) Apr 08 08:54:50.70: [25814]: <-- [9:AT+FET=0\r] Apr 08 08:55:00.13: [25814]: --> [7:+FPTS:4] Apr 08 08:55:00.13: [25814]: --> [2:OK] Apr 08 08:55:00.13: [25814]: SEND recv PIN (procedural interrupt negative) Apr 08 08:55:00.13: [25814]: <-- [6:AT+FK\r] Apr 08 08:55:01.73: [25814]: --> [7:+FHNG:2] Apr 08 08:55:01.73: [25814]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (code 2) Apr 08 08:55:02.41: [25814]: --> [2:OK] Apr 08 08:55:02.41: [25814]: <-- [5:ATH0\r] Apr 08 08:55:02.65: [25814]: --> [2:OK] Apr 08 08:55:02.77: [25814]: SESSION END ---- Unsent job status ---- Destination: 18474324447 JobID: 1816 GroupID: 1816 Sender: carsons Mailaddr: carsons@server.carsonsofhp.com CommID: 00000834 Submitted From: localhost Page Width: 215 (mm) Page Length: 279 (mm) Resolution: 98 (lpi) Status: Unable to transmit page (NAK with operator intervention) Dialogs: 1 (exchanges with remote device) Dials: 0 (consecutive failed calls to destination) Calls: 1 (total phone calls placed) Pages: 5 (pages transmitted) TotPages: 7 (total pages to transmit) Attempts: 0 (attempts to send current page) Dirnum: 0 (directory of next page to send) Marty