HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: GVC Modem



Reinhard Ruscher wrote:
    
    Hi,
    
    when I learnd about hylafax some days ago, I was so excited I had
    to ftp it at once. I think it's a great piece of SW!
    
    Compiling, installing and configuring was a smooth thing, alas
    I encountered a problem with my (prehistorian) GVC Modem (Fax V.27ter,
    V.29).
    
    Here is the log:
    
    ===> cut here
    
    7653]: SESSION BEGIN 00000005 492273910022

BTW: It's not a good idea to cut the time information out of the log.

    7653]: SEND FAX: JOB 2 DEST 910022 COMMID 00000005
    7653]: DELAY 2600 ms
    7653]: <-- [15:ATE0V1Q0S0=0H0\r]
    7653]: --> [14:ATE0V1Q0S0=0H0]
    7653]: --> [2:OK]
    7653]: <-- [21:ATS8=2S7=60\Q3&D3&C1\r]
    7653]: --> [2:OK]
    7653]: <-- [12:AT+FCLASS=2\r]
    7653]: --> [2:OK]
    7653]: <-- [10:AT+FTBC=0\r]
    7653]: --> [5:ERROR]
    7653]: MODEM Command error
    7653]: <-- [10:AT+FBOR=0\r]
    7653]: --> [2:OK]
    7653]: <-- [13:AT+FPHCTO=30\r]
    7653]: --> [5:ERROR]
    7653]: MODEM Command error
    7653]: <-- [24:AT+FDCC=1,3,2,2,2,0,0,0\r]
    7653]: --> [2:OK]
    7653]: <-- [5:ATM0\r]
    7653]: --> [2:OK]
    7653]: <-- [12:AT+FCLASS=2\r]
    7653]: --> [2:OK]
    7653]: <-- [10:AT+FTBC=0\r]
    7653]: --> [5:ERROR]
    7653]: MODEM Command error
    7653]: <-- [10:AT+FBOR=0\r]
    7653]: --> [2:OK]
    7653]: <-- [13:AT+FPHCTO=30\r]
    7653]: --> [5:ERROR]
    7653]: MODEM Command error
    7653]: <-- [24:AT+FDCC=1,3,2,2,2,0,0,0\r]
    7653]: --> [2:OK]
    7653]: <-- [24:AT+FLID="+492273910022"\r]
    7653]: --> [2:OK]
    7653]: DIAL 910022
    7653]: <-- [11:ATDT910022\r]
    7653]: --> [3:CED]
    7653]: --> [5:+FCON]
    7653]: --> [30:+FNSF:AD 00 36 40 80 28 01 E4 ]
    7653]: REMOTE NSF "AD 00 36 40 80 28 01 E4"
    7653]: --> [26:+FCSI:     +49 2273 910022]
    7653]: REMOTE CSI "+49 2273 910022"
    7653]: --> [21:+FDIS:1,3,0,2,0,0,0,4]
    7653]: --> [2:OK]
    7653]: REMOTE best rate 9600 bit/s
    7653]: REMOTE max page width 1728 pixels in 215 mm
    7653]: REMOTE max unlimited page length 
    7653]: REMOTE best vres 7.7 line/mm
    7653]: REMOTE best format 1-D MR
    7653]: REMOTE best 20 ms, 10 ms/scanline
    7653]: USE 9600 bit/s
    7653]: USE 20 ms, 10 ms/scanline
    7653]: SEND file "docq/doc2.ps;30"
    7653]: Modem does not support document page width, max page width 2432 pixels, image width 1686 pixels
    7653]: <-- [5:ATH0\r]
    7653]: --> [9:+FHNG: 40]
    7653]: REMOTE HANGUP: Unspecified Transmit Phase C error (code 40)
    7653]: --> [2:OK]
    7653]: SESSION END

Check your PostScript file -- is it in landscape format?
(See the mailing-list archive, Thu, 06 Feb 1997, Subject:
Re: Busy signal detected).

	matthias




Project hosted by iFAX Solutions