Problem with WHFC-0.3 client

[Mario Misic <mario@iva.laus.hr>]

Hi everybody !


I have hylafax40-pl1 software installed on AIX-3.2.5 and it works fine when
I use Unix mail to send faxes, also it works from eudora only when I send
*.txt files, and it is OK.

My problem is when I use WHFC-0.3 client (on NT-4.0 server or Win-95) with
same server configuration.
WHFC-0.3 sends corectly files to Hylafax server, then modem dial number but
it can not  connect to another modem.

Is a problem on client side or server side ?

Thanks !!


This is a log file from server:    

Mar 20 14:50:12.61: [26686]: SESSION BEGIN 00000004 38502032
Mar 20 14:50:12.61: [26686]: SEND FAX: JOB 4 DEST 32 COMMID 00000004
Mar 20 14:50:12.61: [26686]: DELAY 2600 ms
Mar 20 14:50:15.22: [26686]: <-- [17:ATE0V1Q0X3S0=0H0\r]
Mar 20 14:50:15.35: [26686]: --> [2:OK]
Mar 20 14:50:15.35: [26686]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Mar 20 14:50:15.49: [26686]: --> [2:OK]
Mar 20 14:50:15.49: [26686]: <-- [14:AT+FCLASS=2.0\r]
Mar 20 14:50:15.62: [26686]: --> [2:OK]
Mar 20 14:50:15.62: [26686]: <-- [9:AT+FLO=2\r]
Mar 20 14:50:15.75: [26686]: --> [2:OK]
Mar 20 14:50:15.75: [26686]: <-- [9:AT+FPP=0\r]
Mar 20 14:50:15.89: [26686]: --> [2:OK]
Mar 20 14:50:15.89: [26686]: <-- [9:AT+FBO=0\r]
Mar 20 14:50:16.02: [26686]: --> [2:OK]
Mar 20 14:50:16.02: [26686]: <-- [10:AT+FCT=30\r]
Mar 20 14:50:16.15: [26686]: --> [2:OK]
Mar 20 14:50:16.15: [26686]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 20 14:50:16.28: [26686]: --> [2:OK]
Mar 20 14:50:16.28: [26686]: <-- [9:AT+FIE=0\r]
Mar 20 14:50:16.42: [26686]: --> [2:OK]
Mar 20 14:50:16.42: [26686]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Mar 20 14:50:16.55: [26686]: --> [2:OK]
Mar 20 14:50:16.55: [26686]: <-- [5:ATM1\r]
Mar 20 14:50:16.68: [26686]: --> [2:OK]
Mar 20 14:50:16.72: [26686]: <-- [14:AT+FCLASS=2.0\r]
Mar 20 14:50:16.95: [26686]: --> [2:OK]
Mar 20 14:50:16.96: [26686]: <-- [9:AT+FLO=2\r]
Mar 20 14:50:17.29: [26686]: --> [2:OK]
Mar 20 14:50:17.29: [26686]: <-- [9:AT+FPP=0\r]
Mar 20 14:50:17.62: [26686]: --> [2:OK]
Mar 20 14:50:17.62: [26686]: <-- [9:AT+FBO=0\r]
Mar 20 14:50:17.95: [26686]: --> [2:OK]
Mar 20 14:50:17.95: [26686]: <-- [10:AT+FCT=30\r]
Mar 20 14:50:18.29: [26686]: --> [2:OK]
Mar 20 14:50:18.29: [26686]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 20 14:50:18.52: [26686]: --> [2:OK]
Mar 20 14:50:18.52: [26686]: <-- [9:AT+FIE=0\r]
Mar 20 14:50:18.75: [26686]: --> [2:OK]
Mar 20 14:50:18.75: [26686]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Mar 20 14:50:18.99: [26686]: --> [2:OK]
Mar 20 14:50:18.99: [26686]: <-- [29:AT+FLI="Computer Consulting"\r]
Mar 20 14:50:19.22: [26686]: --> [2:OK]
Mar 20 14:50:19.25: [26686]: DIAL 32
Mar 20 14:50:19.25: [26686]: <-- [7:ATDT32\r]
Mar 20 14:50:34.19: [26686]: --> [4:+FCO]
Mar 20 14:50:36.98: [26686]: --> [27:+FNF:B5007688776910B21663D3]
Mar 20 14:50:36.98: [26686]: REMOTE NSF "B5007688776910B21663D3"
Mar 20 14:50:36.98: [26686]: --> [27:+FCI:" 385 020 411 136    "]
Mar 20 14:50:36.98: [26686]: REMOTE CSI "385 020 411 136"
Mar 20 14:50:36.98: [26686]: --> [20:+FIS:1,5,2,2,0,0,0,0]
Mar 20 14:50:36.99: [26686]: --> [2:OK]
Mar 20 14:50:37.00: [26686]: REMOTE best rate 14400 bit/s
Mar 20 14:50:37.00: [26686]: REMOTE max page width 2432 pixels in 303 mm
Mar 20 14:50:37.00: [26686]: REMOTE max unlimited page length 
Mar 20 14:50:37.00: [26686]: REMOTE best vres 7.7 line/mm
Mar 20 14:50:37.00: [26686]: REMOTE best format 1-D MR
Mar 20 14:50:37.00: [26686]: REMOTE best 0 ms/scanline
Mar 20 14:50:37.00: [26686]: USE 14400 bit/s
Mar 20 14:50:37.00: [26686]: USE 0 ms/scanline
Mar 20 14:50:37.00: [26686]: <-- [5:ATH0\r]
Mar 20 14:50:37.33: [26686]: --> [2:OK]
Mar 20 14:50:37.33: [26686]: SESSION END


and this is log from syslog:

Mar 19 14:57:48 laus FaxQueuer[41302]: SUBMIT JOB 5
Mar 19 14:58:03 laus FaxSend[48062]: MODEM USROBOTICS SPORTSTER V.34+ FAX /
Mar 19 14:58:03 laus FaxSend[48062]: SEND FAX: JOB 5 DEST 32 COMMID 00000006
Mar 19 14:58:29 laus FaxQueuer[41302]: NOTIFY: bin/notify "doneq/q5" "done" "0:3
8"
Mar 19 14:58:30 laus sendmail[47573]: OAA47573: from=fax, size=378, class=0, pri
=30378, nrcpts=1, msgid=<199703191358.OAA47573@laus.dbk.laus.hr>, relay=uucp@loc
alhost
Mar 19 14:58:31 laus sendmail[25818]: OAA47573: to=mario@laus.hr, ctladdr=fax (5
/203), delay=00:00:01, xdelay=00:00:00, mailer=smtp, relay=iva.laus.hr. [194.152
.247.34], stat=Sent (Ok)

Mario Misic