Re: Dialing Tone in a pulse line

[Stefan Soucek <e9325745@student.tuwien.ac.at>]

> 	How can i dial in pulse mode ?!
> 	I have'nt seen any configuration file to set this feature.
> 
> 
> 	the relevant fax log:
> 
> Mar 14 15:43:16.05: [28215]: DIAL 2361906
> Mar 14 15:43:16.05: [28215]: <-- [12:ATDT2361906\r]
> Mar 14 15:43:18.16: [28215]: --> [12:NO DIAL TONE]
> Mar 14 15:43:18.19: [28215]: SEND FAILED: No local dialtone
> 

It seems that your problem is not that you can't dial in pulse mode but 
your modem is probably connected to a PBX (or it is not connected properly 
at all).

In the case of the PBX use the command ATX3DT for dialing. This enables blind
dialing without checking for any dial tone.

			Hope it helps, Stefan.