Could not reopen converted...

[Tech <tech@armigeron.com>]

Hello all:

	Hopefully someone can help me.  I recently installed the linux
binary distribution of hylafax v4.0pl1 on a Redhat 3.0.3 system.  I can fax 
out straight text files with no problem, but if I try to auto-generate a
cover page or use faxmail, I get the following error message:


------------------- 
Your facsimile job to 3817390 was not sent because document conversion
to facsimile failed.  The output from the converter program was:

Could not reopen converted document to verify format

Check any PostScript documents for non-standard fonts and invalid constructs.

    ---- Unsent job status ----

   Destination: 3817390
         JobID: 75
       GroupID: 75
        Sender: root
      Mailaddr: ryan@armigeron.com
         Modem: ttyS3
Submitted From: toy.armigeron.com
    Page Width: 215 (mm)
   Page Length: 279 (mm)
    Resolution: 98 (lpi)
        Status: Could not reopen converted document to verify format
       Dialogs: 0 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 0 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 0 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc75.cover            0 PostScript cover page
docq/doc89.ps.75            0 PostScript
------------------- 

I have read the man pages and html docs thoroughly and have not found a
clear solution.  I would greatly appreciate any suggestions or solutions.
Thanks in advance.

Ryan Shahoud
tech@armigeron.com
------------------