HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problems with faxgetty and Linux



-----BEGIN PGP SIGNED MESSAGE-----


Kim, simply put: you're doing something wrong.

Faxgetty should be started in the Linux equivalent of /etc/ttytab (called
/etc/inittab, I believe?). That way, if it gets killed off, it will be
restarted properly on the fly.

Also: the PPP dial-out should be putting the modem into data mode.
For example, whenever dialing out, I always use "AT&F" to set the modem
into factory default mode so I know exactly what I'm working with, then
add any extra registers I need to set.

A lot of software and weird init strings rely on the modem being in
a particular state based on being the only software to use it. HylaFAX
doesn't have this problem, but other software (such as the init-strings
in your PPP configurations) often do.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBMx7uJT/+ItycgIJRAQE4qwP/WmWRCyhlBzou2E4dQGZjDYO8fyYK66RK
jSW67QsKWnz79TwfQ848Qms0ANwRhy/rqQuXF64Gpm4sccLOIFVsCPJozNlNCl6R
6K6WScwnHwayfEO3sCg6gvYym0MCADQXhWurqUpneKak63o8qZqKTAHzlGCAFZT1
zaHJ5phmk4s=
=RkDC
-----END PGP SIGNATURE-----




Project hosted by iFAX Solutions