![]() |
Hello! I am currently using the newest distribution of Hylafax on a Linux 2.0.18 OS. receiving faxes works fine, but I have problems with sending faxes. I am using a NoName Faxmodem with a Rockwell 144DP Chip. The manufacture result of my modem is EXAR and the Version is 7.7 (whatever it means). When I try to send a fax, the modem dials. The other party responds with the fax answer carrier, but my fax doesn't recognize it. Any idea where's the problem? Thanx a lot! Gregor Here's a sample session log: Feb 18 19:26:37.55: [ 204]: SESSION BEGIN 00000048 49913124 Feb 18 19:26:37.56: [ 204]: SEND FAX: JOB 9 DEST 24 COMMID 00000048 Feb 18 19:26:37.56: [ 204]: DELAY 2600 ms Feb 18 19:26:40.17: [ 204]: <-- [15:ATE0V1Q0S0=0H0\r] Feb 18 19:26:40.77: [ 204]: --> [14:ATE0V1Q0S0=0H0] Feb 18 19:26:40.77: [ 204]: --> [2:OK] Feb 18 19:26:40.77: [ 204]: <-- [21:ATS8=2S7=80&K3&D3&C1\r] Feb 18 19:26:41.01: [ 204]: --> [2:OK] Feb 18 19:26:41.01: [ 204]: <-- [12:AT+FCLASS=2\r] Feb 18 19:26:41.24: [ 204]: --> [2:OK] Feb 18 19:26:41.24: [ 204]: <-- [10:AT+FTBC=0\r] Feb 18 19:26:41.47: [ 204]: --> [5:ERROR] Feb 18 19:26:41.47: [ 204]: MODEM Command error Feb 18 19:26:41.47: [ 204]: <-- [10:AT+FBOR=1\r] Feb 18 19:26:41.70: [ 204]: --> [2:OK] Feb 18 19:26:41.70: [ 204]: <-- [13:AT+FPHCTO=30\r] Feb 18 19:26:41.93: [ 204]: --> [5:ERROR] Feb 18 19:26:41.93: [ 204]: MODEM Command error Feb 18 19:26:41.93: [ 204]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r] Feb 18 19:26:42.17: [ 204]: --> [2:OK] Feb 18 19:26:42.17: [ 204]: <-- [5:ATM0\r] Feb 18 19:26:42.40: [ 204]: --> [2:OK] Feb 18 19:26:42.40: [ 204]: <-- [12:AT+FCLASS=2\r] Feb 18 19:26:42.73: [ 204]: --> [2:OK] Feb 18 19:26:42.73: [ 204]: <-- [10:AT+FTBC=0\r] Feb 18 19:26:43.06: [ 204]: --> [5:ERROR] Feb 18 19:26:43.06: [ 204]: MODEM Command error Feb 18 19:26:43.06: [ 204]: <-- [10:AT+FBOR=1\r] Feb 18 19:26:43.39: [ 204]: --> [2:OK] Feb 18 19:26:43.39: [ 204]: <-- [13:AT+FPHCTO=30\r] Feb 18 19:26:43.73: [ 204]: --> [5:ERROR] Feb 18 19:26:43.73: [ 204]: MODEM Command error Feb 18 19:26:43.73: [ 204]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r] Feb 18 19:26:44.07: [ 204]: --> [2:OK] Feb 18 19:26:44.07: [ 204]: <-- [26:AT+FLID="+49 9131 604158"\r] Feb 18 19:26:44.41: [ 204]: --> [2:OK] Feb 18 19:26:44.53: [ 204]: DIAL 09135799845 Feb 18 19:26:44.53: [ 204]: <-- [8:ATDT09135799845@\r] Feb 18 19:28:07.91: [ 204]: --> [9:NO ANSWER] Feb 18 19:28:08.95: [ 204]: SEND FAILED: No answer from remote Feb 18 19:28:08.95: [ 204]: <-- [5:ATH0\r] Feb 18 19:28:09.65: [ 204]: --> [2:OK] Feb 18 19:28:09.78: [ 204]: SESSION END -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Gregor Longariva Hallerstrasse 22 Sonnenstrasse 1 91058 Erlangen - Germany 39031 Bruneck - Italy (0049) 09131-604148 (0039) 0474-84746 EMail: grlongar@cip.informatik.uni-erlangen.de sz1203@rrze.uni-erlangen.de http: wwwcip.informatik.uni-erlangen.de/user/grlongar -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=