![]() |
Hi, hfax installe don Linux redHat Picasso. Outbouns services works FINE!!! Inbound services not. I am useing USR Courier. faxgetty running! Modem does not answer a call!!!! If I perform manual answer (faxanswer modem) I get rec. fail. Any suggestions!!! Br Nejc Details: An attempt to receive facsimile on modem failed because: ---- Transcript of session follows ---- Feb 04 17:17:14.13: [22187]: SESSION BEGIN 00002954 386061386611321165 Feb 04 17:17:14.13: [22187]: <-- [4:ATA\r] Feb 04 17:17:33.43: [22187]: --> [4:+FCO] Feb 04 17:17:33.43: [22187]: ANSWER: FAX CONNECTION Feb 04 17:17:33.43: [22187]: RECV FAX: begin Feb 04 17:17:35.21: [22187]: --> [27:+FTI:" 0"] Feb 04 17:17:35.21: [22187]: REMOTE TSI "0" Feb 04 17:17:35.54: [22187]: --> [20:+FCS:0,1,0,2,0,0,0,0] Feb 04 17:17:35.54: [22187]: REMOTE wants 4800 bit/s Feb 04 17:17:35.54: [22187]: REMOTE wants page width 1728 pixels in 215 mm Feb 04 17:17:35.54: [22187]: REMOTE wants unlimited page length Feb 04 17:17:35.54: [22187]: REMOTE wants 3.85 line/mm Feb 04 17:17:35.54: [22187]: REMOTE wants 1-D MR Feb 04 17:17:35.68: [22187]: --> [2:OK] Feb 04 17:17:35.68: [22187]: REJECT TSI "0" Feb 04 17:17:35.68: [22187]: RECV FAX (00002954): recvq/fax00003.tif from 0, route to <unspecified>, 0 pages in 0:02 Feb 04 17:17:35.68: [22187]: RECV FAX: Permission denied (unacceptable client TSI) Feb 04 17:17:35.70: [22187]: <-- [7:AT+FKS\r] Feb 04 17:18:05.71: [22187]: MODEM <Timeout> Feb 04 17:18:05.71: [22187]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif" "modem" "00002954" "" -- Jernej Romih Unistar d.o.o. System Integration Internet Service Provider tel: 386 (0)61 1315305 fax: 386 (0)61 1321165 http://www.unistar.si mail to:nejc@unistar.si