![]() |
Hello HylaFAX users, I just installed HylaFAX 4.0pl1 on a SGI (IRIX 6.3) and encounterd following problem: Using GhostScript 3.33 from the FTP-Server I could fax PostScript- Documents easily. But there wer PS-files which caused problems with that release of GS, so I decided to use GS version 4.03. After that I'm unable to send _any_ PS-File. The conversion takes place, the modem contacts the remote fax-machine and the transmissions stops: [... some initalizing stuff ...] Feb 04 15:20:01.24: [ 7540]: --> [20:+FIS:1,3,0,2,1,0,0,2] Feb 04 15:20:01.24: [ 7540]: --> [2:OK] Feb 04 15:20:01.24: [ 7540]: REMOTE best rate 9600 bit/s Feb 04 15:20:01.24: [ 7540]: REMOTE max page width 1728 pixels in 215 mm Feb 04 15:20:01.24: [ 7540]: REMOTE max unlimited page length Feb 04 15:20:01.24: [ 7540]: REMOTE best vres 7.7 line/mm Feb 04 15:20:01.24: [ 7540]: REMOTE best format 2-D MR Feb 04 15:20:01.24: [ 7540]: REMOTE best 10 ms, 5 ms/scanline Feb 04 15:20:01.24: [ 7540]: USE 9600 bit/s Feb 04 15:20:01.24: [ 7540]: USE 10 ms, 5 ms/scanline Feb 04 15:20:01.24: [ 7540]: SEND file "docq/doc47.ps;01" Feb 04 15:20:01.24: [ 7540]: Modem does not support document page width, max pag e width 2432 pixels, image width 1687 pixels Feb 04 15:20:01.24: [ 7540]: <-- [5:ATH0\r] Feb 04 15:20:01.63: [ 7540]: --> [2:OK] Feb 04 15:20:01.63: [ 7540]: SESSION END Note the line with the __max.__ page width. That number is greater than the current page width, but the transmission stops. :-/ Any ideas? Is there a bug in HylaFAX? Did I miss the solution in the mailing list? -- Hasta luego, Dirk. --- <| ----------------------------------------------------- /| Dirk Jahnke / |\ TU Hamburg - Harburg http://www.tu-harburg.de/rzt/rzt/dj | \ - RECHENZENTRUM - mailto:Jahnke@tu-harburg.de / | \ Denickestrasse 22 o/o | \ 21071 Hamburg Tel. : +49-(0)40/7718-3364 __8_8___|____\ GERMANY Fax. : +49-(0)40/7718-2803 | / ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~- X.400: C=de A=d400 P=tu-harburg S=jahnke