Re: An error - Why

[glenn@aoi.ultranet.com (Glenn Burkhardt)]

----------
X-Sun-Data-Type: text
X-Sun-Data-Description: text
X-Sun-Data-Name: text
X-Sun-Content-Lines: 37

> From owner-flexfax@celestial.com Wed Jan 15 08:13:35 1997
> Sender: owner-flexfax@celestial.com
> Subject: Re: An error - Why
> To: uri@harmonic.co.il (Uri Shkolnik)
> Date: Fri, 10 Jan 1997 17:15:23 +0100 (MET)
> Cc: flexfax@sgi.com
> From: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
> Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
> Organization: SoftcoN GmbH
> Phone: +49 89 61308-51 (company)
> Operating-System: UNIX_SV 4.2 1
> X-Mailer: ELM [version 2.4 PL23]
> Mime-Version: 1.0
> Content-Type> : > text/plain> ; > charset=ISO-8859-1> 
> Content-Transfer-Encoding: 8bit
> Sender: owner-flexfax@celestial.com
> Content-Length: 1023
> 
> Uri Shkolnik wrote:
>     
>     Hi,
>     
>     My system: SunOs4.1.4/Sparce20, Hylafax 4.0 (bin). 
>     My modem: MULTI-TECH SYSTEMS MT2834ZDXI/0312
>     
>     I get this error:
>     
>     Jan 10 01:51:14 sun FaxGetty[191]: <-- [31:AT+FLID="Harmonic Lightwaves "\r]
>     Jan 10 01:51:14 sun FaxGetty[191]: --> [2:OK]
>     Jan 10 01:51:14 sun FaxGetty[191]: <-- [18:AT+FAA=0+FCLASS=2\r]
>     Jan 10 01:51:14 sun FaxGetty[191]: --> [5:ERROR]
>     Jan 10 01:51:14 sun FaxGetty[191]: MODEM Command error

I'm attaching a config file that works for me on SunOS 4.1.4 with a MultiTech
MT2834ZDX.


----------
X-Sun-Data-Type: default
X-Sun-Data-Description: default
X-Sun-Data-Name: config.mt2834
X-Sun-Content-Lines: 87

# $Header: /usr/people/sam/irix/fax/config/RCS/mt-1432,v 1.22 1996/01/19 06:33:32 sam Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# Configuration for a Multi-Tech MT1432, MT224BA, and MT1932ZDX modems.
#
# MT1432	firmware rev 0307 I or newer
# MT132BG	rev 0109A
# MT1932ZDX	rev 0109H
#
# Note that MT1432 modems come in several varieties:
#
# MT1432BA	uses Rockwell data pump
# MT1432BA/A	uses AT&T data pump
# MT1432BG	MT1432BA tweaked for German FCC
# MT1432MK	(for UK?)
#
# The modem has been tried with both XON/XOFF and RTS/CTS flow
# control; this configuration is for hardware flow control.
#
#
CountryCode:		1
AreaCode:		508
FAXNumber:		+1.508.453.2906
LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0644
LogFileMode:		0644
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"DIAL.38400 -"
LocalIdentifier:	"AOI INTERNATIONAL"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%p of %%t"
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class2		# use class 2 interface
ModemRate:		38400		# lock rate for DCE-DTE communication
ModemFlowControl:	rtscts 		# default
#
ModemHardFlowCmd:	AT&E4		# hardware flow control
ModemSoftFlowCmd:	AT&E5		# software flow control
ModemSetupDTRCmd:	AT&D3		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemSetupAACmd:	AT+FAA=1	# enable adaptive-answer in class 2
#
# NB: some models get confused by the @
#
ModemDialCmd:		ATDT%s@		# T for tone dialing, @ for silence
#
Class2RecvDataTrigger:	"\022"		# character sent to modem to start recv
#
# use rtscts for data connections
#ModemAnswerDataBeginCmd: "+++AT&E4O\n<waitfor:CONNECT>"